Welkom,  GastInloggen

TP-582T

2x1 HDMI Plus Bidirectional RS−232, Ethernet & IR over Twisted Pair Switcher/Transmitter van Kramer Electronics

Meer details


€ 500,00 ex. Btw

TP-582T

The TP−582T is a high−quality twisted pair transmitter for HDMI, Ethernet 100BaseT, bidirectional RS−232 and IR signals. The TP−582T selects one of two HDMI inputs, and converts it with the Ethernet 100BaseT, RS−232 and IR input signals to a twisted pair signal. The TP−582R converts the twisted pair signal back to Ethernet 100BaseT, RS−232, IR and two HDMI outputs, and de−embeds the audio to S/PDIF and TOSLINK® audio outputs.
  • Max. Data Rate - 2.25Gbps.
  • HDBaseT Technology.
  • HDTV Compatible.
  • HDCP Compliance.
  • HDMI Support - HDMI (V.1.4 with Deep Color, x.v.Color™, Lip Sync, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS−HD, CEC).
  • 3D Pass-Through.
  • EDID PassThru - Passes EDID/HDCP signals from source to display.
  • Bidirectional RS-232 Interface - Commands and data can flow in both directions via the RS−232 interface, allowing status requests and control of the destination unit.
  • Ethernet Interface - Passes 100BaseT.
  • System Range - Up to 100m (330ft).
  • Cable - Requires shielded twisted pair (STP) cable. For optimum range and performance use, use Kramer's BC−DGKat524, BC−DGKat623 and BC−DGKat723 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non−Kramer CAT 5, CAT 6, and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.
  • Control - Front panel and contact closure switching.
  • Indicators - Status LEDs for input selection, output, link and power.
  • Compact MegaTOOLS® - 2 units can be rack mounted side−by−side in a 1U rack space with the optional RK−T2B universal rack adapter. 
RELATED PRODUCTS: 19” (1U): RK-T2B

SPECIFICATIONS

 

INPUTS: 2 HDMI connectors, 1 IR on a 3.5mm mini jack, 1 Ethernet 100BaseT on an RJ−45 connector, 1 RS−232 on a 9−pin D−sub connector, 1 remote contact closure on a terminal block connector.
OUTPUT: 1 RJ−45 connector.
BANDWIDTH: Supports up to 2.25Gbps bandwidth per graphic channel.
COMPLIANCE WITH HDMI STANDARD: Supports HDMI and HDCP.
POWER SOURCE:

5V DC, 800mA.

DIMENSIONS: 18.8cm x 11.4cm x 2.4cm (7.4" x 4.5" x 1.0") W, D, H.
WEIGHT: 0.6kg (1.4lbs).
ACCESSORIES: Power supply.
OPTIONS: RK−T2B 19” rack mount.

 

APPLICATIONS

  • Home theater, presentation and multimedia applications
  • Rental and staging

 

Winkelmand

Uw winkelmand bevat geen producten.

Verzendkosten € 0,00
Totaal € 0,00

Prijzen zijn ex. Btw

Winkelmandje Afrekenen